How to tie a slip knot

Here are step-by-step instructions for tying a slip knot:

1. Make a loop in the middle of the rope or cord. Keep the loop wide and loose.
2. Pass the end of the rope behind the loop.
3. Pass the end through the loop once more creating a second loop that rests on top of the first loop.
4. Hold the end tight and pull on the standing part of the rope to tighten the knot. This should cinch the knot together.
5. Check that the knot can slide and slip along the standing part of the rope when pulled. If it can’t, loosen it and start again.
6. When tightened, the slip knot should leave a small loop at the top that allows the knot to cinch down when pulled.
7. Leave plenty of tail at the end – at least a few inches extending past the knot. This helps grip and tighten the knot.

The finished slip knot should move freely up and down the standing rope when tension is applied or released. It creates an adjustable loop for various uses. Make sure to loosen fully before untying to avoid jamming. Let me know if you need any clarification or have additional knot-tying questions!